Abstract

Previous studies indicated that essential and xenobiotic metals differ substantially in terms of their toxicokinetics. Whether these differences are due to different assimilation rates, different elimination rates, or both, and whether all metals are regulated in a similar manner but with different efficiency remains unclear. To compare the mechanisms responsible for the regulation of different metals, parameters for toxicokinetic models have to be tested under exposures to the identical molar concentration of those metals. In this study, the cricket Gryllus assimilis was exposed to Zn or Cd at 2.5, 10, and 40mMkg−1 dry food. The body concentrations of the metals were not perfectly regulated by the crickets. For Zn, a clear increase in the body concentration was found only at the highest treatment; whereas at the lowest treatment, the internal concentration remained unchanged throughout the experiment. At the lowest Zn concentration, the assimilation (kA) [day−1] and elimination (kE) [day−1] rate constants were balanced (kA=0.024, kE=0.024). When increasing the Zn exposure, kA decreased to 0.018 at 10mMkg−1 and 0.01 at 40mMkg−1, and kE increased to 0.05 and 0.07, respectively. Therefore, the body concentration of Zn was regulated by simultaneously changing the assimilation and elimination rate. By contrast, even at the lowest treatment, a significant increase in Cd concentration was observed in the crickets. The equilibrium Cd concentration resulted almost exclusively from increasing kE from 0.17, through 0.28 to 0.61 at 2.5, 10 and 40mMkg−1. The kA for Cd did not reveal any clear trend. Zn was more efficiently regulated by crickets than was Cd: a 16-fold increase in exposure concentration (from 2.5 to 40mM Znkg−1) resulted only in a twofold increase of internal concentration, whereas the identical increase in Cd exposure concentration resulted in almost a sevenfold increase in internal concentration of this metal.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call