Abstract

The photo-mask cost of standard-cell-based ASICs has been increased so prohibitively that low-volume production LSIs are difficult to fabricate due to high non-recurring engineering (NRE) cost including mask cost. Recently, user-programmable devices, such as FPGAs are started to be used for low-volume consumer products. However, FPGAs cannot be replaced for general purpose because of its lower speed-performance and higher power consumption. In this paper, we propose the user-programmable architecture called VPEX (Via Programmable logic device using EXclusive-or array), in which the hardware logic can be programmed by changing layout patterns on 2 via-layers. The logic element (LE) of VPEX consists of complex-gate-type EXclusive OR (EXOR) and Inverter (NOT) gates. The single LE can output 12 logics which include NOT, Buffer (BUF), all 2-inputs logic functions, 3-inputs AOI21 and inverted-output multiplexer (MUXI) by changing via-1 layout pattern. Furthermore, via-1 layout is optimized for high-throughput EB direct writing, so mask-less programming will be realized in VPEX. We compared the performance of area, speed, and power consumption of VPEX with that of standard-cell-based ASICs and FPGAs. As a result, the speed performance of VPEX was much better than FPGAs and about 1.3-1.6 times worse than standard-cells. We believe that the combination of VPEX architecture and EB direct writing is the best solution for low-volume production LSIs.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.