Abstract
Abstract. In this study we make use of 3-D hydraulic simulations to investigate the regional groundwater flow in the Upper Rhine Graben. The modeling is based on an existing detailed 3-D structural model covering the whole Upper Rhine Graben from the surface down to 14 km of depth. The overall goal of this study is to provide some quantitative analysis on the role of the hydraulic head topology in shaping the underground hydrodynamics by taking into account interactions with the heterogeneous subsurface sedimentary configuration of the basin system. Therefore, the main question addressed by this study can be summarized as follows: does the deep graben flow follow the topographic gradient and the flow direction of the river Rhine from the Alps northward to the northernmost area of the Upper Rhine Graben? Our results demonstrate the presence of a regional subsurface flow in the sedimentary rocks aligning from the graben flanks towards its center and in the southern half of the graben from south to north. The graben-parallel flow velocity is found to be about 1 order of magnitude lower than the velocity predicted perpendicular to the main graben axis. Besides these general trends, the modeling highlights local heterogeneities in the shallow 3-D flow field. Those arise from the interaction between regional groundwater flow and the heterogeneous sedimentary configuration. Within the Cenozoic sediments forming the uppermost aquifer in the model, groundwater flows are driven by imposed hydraulic gradients from recharge areas located at higher elevations in the Black Forest and Vosges Mountains to the discharge region at a lower elevation in the Rhine valley. The presence of a regional aquitard (Keuper) separating the shallow and the deeper aquifer system (Muschelkalk, Buntsandstein, and Rotliegend) hinders hydraulic connection among the two aquifer systems. This is exemplified by the development of a flow system in the deeper aquifers, which shows a more continuous graben-parallel south–north direction. Based on these results we can conclude that both the hydraulic head topology and the level of structuration of the sedimentary sequence exert a 1st-order role in shaping the regional flow system at depth. The regional model predicts a heterogeneous flow system within the upper 4 km of the Upper Rhine Valley, where flow velocities in the graben valley can reach up to 45 mm yr−1 in the upper and lower aquifers. Back to the current conceptual hydrogeological model, the results question the presence of a graben through northward flow, being limited to the southern half of the graben. In the north, the groundwater dynamics turn out to be more complex, being structurally linked to the local geology. This calls for additional studies with a higher level of both structural and stratigraphic attributes in order to arrive at a better quantification of the local to the regional groundwater dynamics in the area.
Highlights
The motivation behind this study is rooted in the search to quantify the intrinsic connection between the productivity of hydrothermal wells and the hydraulic conditions affecting the reservoir hosting the targeted resources
The overall goal of this study is to provide some quantitative analysis on the role of the hydraulic head topology in shaping the underground hydrodynamics by taking into account interactions with the heterogeneous subsurface sedimentary configuration of the basin system
A general feature common to all hydraulic head profiles is that the graben-perpendicular hydraulic head gradients (Fig. 4b–d) are stronger than those along the graben axis (Fig. 4a), mainly reflecting the topology of the groundwater head distribution used to impose the upper boundary condition (Fig. 2)
Summary
The motivation behind this study is rooted in the search to quantify the intrinsic connection between the productivity of hydrothermal wells and the hydraulic conditions affecting the reservoir hosting the targeted resources. In order to achieve this goal, we demonstrate here that regional-scale (i.e., basin-wide) fluid flow models are a basic requirement prior to any exploitation strategy. Such models, integrating the regional geology and physics, are essential to understand the hydraulic conditions acting on the basin scale. The deepest topographic point ( the lowest elevation of the hydraulic head) is found in the northern domain within the federal state of Hesse Based on these observations, it is likely that the regional flow, as driven by hydraulic head gradients, is characterized by a dominant south-to-north component.
Sign-in/Register to view highlights & summary Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
