Abstract

The biocompatible hydrogel materials are used for the fabrication of artificial cornea. The refractive index of the hydrogel material can affect the optical quality of the artificial cornea. It is challenging to measure the refractive index of the hydrogel material because it is between solid and liquid status during the fabrication processes. In this work, we propose using the Shack-Hartmann wavefront sensor system to measure the wavefront images and to calculate the corresponding aberrations of optical material. The wavefront aberrations can be used to estimate the refractive index of the optical material. To prove the concept, the standard N-BK7 bi-convex lenses with focal lengths of 100 and 150 mm at wavelengths 780, 532, and 450 nm have been measured, and the results show that the relative errors of the average measured refractive indices are about 0.1%-0.17%. We used this proposed method to measure the refractive index of the P407-DA hydrogel material. We found that the average measured refractive indices of the P407-DA hydrogel material are 1.3175, 1.3516, and 1.3645 at wavelengths 780, 532, and 450 nm, respectively. Compared with the refractive index of human cornea, the P407-DA hydrogel can be used as the artificial cornea material. The Cauchy dispersion formula can be used to calculate the Abbe number of the P407-DA hydrogel material, which is about 11, lower than the human cornea's Abbe number. It means that the P407-DA hydrogel material has higher chromatic dispersion than the human cornea material. Moreover, the elasmobranch (shark) corneas, which are known as the suitable material for xenotransplantation, are measured by the Shack-Hartmann wavefront sensor system. The ABBE refractometer (ATAGO DR-M4) is used to measure the flat P407-DA hydrogel sample and it is found that the refractive index is slightly different when compared with the measured results by the Shack-Hartmann wavefront sensor system. The refractive indices of other biocompatible hydrogels poly(acrylic acid) (PAA) and poly(2-hydroxyethyl methacrylate) (PHEMA) are also measured by our proposed method, and it is found that the refractive index of P407-DA is more suitable for designing corneal samples than other hydrogels. It is found that the refractive indices of the elasmobranch corneas are similar to the P407-DA material. Our proposed method to measure the refractive index of hydrogel material using the Shack-Hartmann wavefront sensor system is useful. It is a non-contact, minimally invasive, and time-efficient method for shaped structures. The results can be used as a guide for developing better biocompatible material for artificial cornea.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call