Abstract
► Utilization of molybdenum from nuclear waste in a fast reactor cycle is proposed. ► Fundamental Mo-reformation scheme was experimentally demonstrated. ► Asbestos-derived materials were tested as sintering aids for fuel fabrication. Novel concepts for effective utilization of molybdenum (Mo) from nuclear waste and magnesium silicates from hazardous asbestos wastes are proposed. A fast reactor cycle scheme that incorporates each material is described in the present paper. Results of basic studies on several fundamental technologies for the present cycle are given. Basic separation features of Mo by using the LIX63 microcapsule and tertiary pyridine resin were investigated. A simple chemical synthesis route for Mo precursor powder from Mo-containing HNO 3 solution was demonstrated. Effects of impurities in recovered Mo on sintering behavior of Mo-pellets were experimentally investigated.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.