Abstract
A magnetic field measurement method based on the magneto-volume effect of magnetic fluid (MF) and Fabry-Perot (FP) interferometer (FPI) is proposed, which has higher magnetic field sensitivity and shorter response time than the traditional optical fiber methods. The MF is partially injected into the fabricated FP cavity composed of two sections of SMFs and a capillary glass tube (CGT), where the FPI is made up of optical fiber end face and MF end face. When the external magnetic field is applied to the sensor, the volume change of MF will cause the change of air cavity length. Therefore, the reflection spectrum changes with external magnetic field due to the magneto-volume effect of MF. Experimental results show that the magnetic field sensor shows a sensitivity of 268.81 pm/Gs from 15.5 to 139.7 Gs even with a small amount of MF. The response time is 0.2 s at a step magnetic field of 7.7, 31.0, 46.5, and 139.7 Gs. In this work, the magnetic field sensor boasts high sensitivity, good repeatability, short response time, and low cost, which shows a great potential in applications.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IEEE Transactions on Instrumentation and Measurement
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
