Year-end Sale % OFF 
Abstract
The effect of TiB2 addition on microstructure refinement of the as-cast and reheated A517 steel has been investigated. 0.1 wt.% TiB2 addition resulted in a reduction in equiaxed γ grain size from 990 ± 183 to 116 ± 35 μm and an increase in the volume fraction of equiaxed γ grain region from 5% to 67% in the as-cast A517 steel ingots. Microstructure analysis identified TiN particles rather than TiB2. This is attributed to the low thermodynamic stability of TiB2, leading to its decomposition into free Ti and B elements at an elevated temperature. Then, chemical reaction between the free Ti and residual nitrogen in the liquid resulted in the formation of TiN. Hence, it is considered that TiN acted as heterogeneous nucleation sites for the δ-ferrite. This initiated the refinement and columnar to equiaxed transition of δ-dendrites. As a result, the subsequently formed γ grains were correspondingly refined. Such microstructure refinement led to improvement of the yield strength and ultimate tensile strength of the as-cast A517 steel. However, the reheating of the as-cast A517 steel resulted in a marginal microstructure refinement in the samples with low TiB2 addition. This is attributed to the limited pinning effect of the coarse TiN particles formed during casting process. Consequently, the tensile properties of the reheated A517 steel remained unaffected by the TiB2 addition.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
