Refined mapping and kinematic trend assessment of potential landslides associated with large-scale land creation projects with multitemporal InSAR

Abstract

Since 2012, a mega-project, “Mountain Excavation and City Construction” (MECC), has been underway on the Chinese Loess Plateau, aiming to create extra flat ground for urban growth. However, this large-scale land creation has led to dramatic changes in the local geological environment, forming a large number of engineered loess slopes. This study aims to map and assess the boundaries and stability of these potentially unstable engineered slopes (potential landslides). Based on spatio-temporal deformation patterns of landslides prior to failure, a novel interferometric synthetic aperture radar (InSAR)-based procedure for potential landslide mapping and stability evaluation was constructed in this study. The proposed procedure was employed to map and evaluate the potential landslides in the Yan’an New District (YND), the largest land-creation area in the Loess Plateau. First, the spatial locations and boundaries of the potential landslides were determined by combining optical image interpretation with differential deformation maps derived from Sentinel-1 small baseline subset InSAR (SBAS-InSAR) analysis. Then, the kinematic evolution trend of the mapped potential landslide was evaluated by quantitative analysis of the time-series displacements using an exponential model. Finally, the potential influencing factors and failure modes of the potential landslide were examined and discussed. The results indicate that the InSAR-derived differential deformation maps reflect the external boundary of the potential landslides well, and a total of 18 potential landslides are identified and mapped for the first time in the large-scale land-creation area of the YND. Over 82% of the coherent targets (CTs) within these potential landslides showed primary or steady creep during the InSAR observation period; however, tertiary creep was also observed on several slopes. Thus, it is crucial to utilize multitemporal InSAR and/or ground-based equipment for the continuous monitoring of engineered slopes in large-scale land-creation areas. The high correlation between spatiotemporal deformation patterns and environmental factors indicates that the activity of potential landslides is mainly controlled by the thickness of filling loess, while rainfall accelerates the displacement of slopes. These findings can contribute to the development of landslide disaster prevention and mitigation measures in the YND.