Refined cracked concrete analysis of concrete containment structures subject to operational and environmental loadings

Abstract

Recent commercial nuclear power plant containment concepts involve the use of large reinforced concrete structures to form pressure boundaries. Where these structures are not provided with an integral steel liner, excessive cracking of the concrete under loads could result in the loss of the pressure boundary integrity with the risk of over-pressurization of other structures. Cracking of concrete is a local phenomenon and considerable detail must be included in any analytical model to obtain sufficiently refined results for the prediction of crack size and propagation. This imposes severe limitations on the overall size of structures or structural components for which detailed cracking analysis can be considered directly. To overcome this restriction, a two step procedure was developed in which linear analyses were performed to obtain the gross response, and nonlinear cracking analyses were performed for selected portions of the structure to evaluate local cracking in detail. Through iteration, compatibility of behavior between the linear and nonlinear analyses was achieved with the gross response being used to extrapolate the local cracking results to predict cracking over the entire structure. This paper discusses the analysis procedures for the detailed evaluation of cracking in large reinforced concrete structures and components. Analyses performed for an actual unlined reinforced concrete containment structure using these procedures are discussed and results are presented.