Abstract

Context. Direct imaging and spectroscopy of Earth-like planets and young Jupiters require contrast values up to 106−1010 at angular separations of a few dozen milliarcseconds. To achieve this goal, one of the most promising approaches consists of using large segmented primary mirror telescopes with coronagraphic instruments. While they are able to reach high contrast at small angular separations, coronagraphs are highly sensitive to wavefront errors, however. The segmentation itself is responsible for phasing errors and segment-level vibrations that have to be controlled at a subnanometric accuracy. Aims. We propose an innovative method for a coronagraph design that allows a consequent relaxation of the segment phasing and stability constraints for low segment-count mirrors and generates an instrument that is more robust to segment-level wavefront errors. Methods. This method is based on an optimization of the coronagraph design that includes a segment-level apodization. This is repeated over the pupil to match the segmentation redundancy and improves the contrast stability beyond the minimum separation set by the single-segment diffraction limit. Results. We validate this method on a Giant Magellan Telescope (GMT)-like pupil (seven circular segments) for two coronagraph types: apodized pupil Lyot coronagraphs, and apodizing phase plate coronagraphs. For the apodized pupil Lyot coronagraphs, redundant apodization enables releasing the piston phasing constraints by a factor of 5-20 compared to classical designs. For the apodizing phase plate coronagraphs, the contrast remains almost constant up to 1 radian RMS of the phasing errors. We also show that redundant apodizations increase the robustness of the coronagraph to segment tip-tilt errors, as well as to missing segment errors. Conclusions. Redundant apodization enables reducing or even removing any constraints on the primary mirror segment phasing at the price of larger angular separations and lower throughputs. This method cannot be applied to higher-segment count mirrors such as the ELT or the TMT, but it is particularly suitable for low segment-count mirrors (fewer than ~20 segments) such as the GMT aperture. These mirrors aim for high-contrast imaging of debris disks or exoplanets down to 100 mas.

Highlights

  • The generation of spectro-imagers installed on giant telescopes will give access to smaller angular separations and fainter planets with the aim to characterize young Jupiters and the very first exo-Earths: typically, they target contrasts down to 10−8 at angular separations smaller than 0.1” and are combined with spectrometers or integral field spectrographs

  • This increased robustness compared to the redundant apodized pupil (RAP) and apodized pupil Lyot coronagraphs (APLCs) combination of section 3 is due to a more efficient first step and to the lack of the second step that would modify the redundance of the segment apodization and so the low-order envelope

  • We have presented a method for designing RAPs, which are redundant apodizers that enable releasing the segment phasing constraints

Read more

Summary

Introduction

The generation of spectro-imagers installed on giant telescopes will give access to smaller angular separations and fainter planets with the aim to characterize young Jupiters and the very first exo-Earths: typically, they target contrasts down to 10−8 at angular separations smaller than 0.1” and are combined with spectrometers or integral field spectrographs. The recent NASEM Astro2020 decadal report (National Academies of Sciences & Medicine 2021) recommends the development of a large space telescope to observe planets down to Earth-like planets, such as the Large UV-Optical-IR (LUVOIR) B (The LUVOIR Team 2019) and Habitable Exoplanet (HabEx) (Gaudi et al 2020) candidates This effort has already started and is ongoing, with the improvement and development of new tools to equip the instruments and telescopes: in particular, the primary mirrors are segmented to reach larger diameters (Yaitskova & Dohlen 2002; Yaitskova et al 2003), coronagraphs able to provide very high contrast are becoming robust to amplitude and phase aberrations. The robustness of these designs is measured for piston-like phasing errors, tip-tilt phasing errors, and missing segments

PASTIS model
Hypotheses
Expression of the intensity in the dark zone
Theory of segment apodization
Application cases
Segment and pupil designs
Coronagraph designs
Tolerancing and constraint study
Robustness to other errors
Validation conclusions
One-step coronagraph design
Conclusions for redundant APPs
Conclusions
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call