Reduction of Ochratoxin A Levels in Red Wine by Bentonite, Modified Bentonites, and Chitosan

Abstract

Adsorption method may play an important role to remove ochratoxin A (OTA) from wine by bentonite (B), nonylammonium bentonite (NB), dodecylammonium bentonite (DB), KSF-montmorillonite (KSF), and chitosan bead (CB). The optimum conditions of OTA adsorption from synthetic solutions were revealed at room temperature and pH 3.5. The adsorption equilibria of B and NB were almost established within 120 and 240 min, respectively. DB, KSF, and CB had about 90 min of equilibration time. The adsorption efficiency carried out in the synthetic OTA solution did not change remarkably when the amounts of adsorbents were 25 mg for bentonite, DB, and KSF and 100 mg for NB and CB. Furthermore, 25 mg of adsorbents was used at all adsorption studies in synthetic solution. The adsorption isotherm was fitted with mostly a Freundlich equation with respect to the correlation coefficients. The adsorption data were evaluated using Langmuir and Freundlich equations having Kf values ranging from 0.011 to 9.5 with respect to correlation coefficients (R2 = 0.900-0.977). DB and KSF have the highest adsorption capacity for OTA in synthetic solutions. In wine, the removal of OTA was succeeded at a percentage of 60-100 by KSF and CB. Furthermore, the highest adsorption capacity of OTA for red wine was obtained by using 250 mg of KSF, which caused less damage to the nature of wine and also low adsorption of polyphenols and anthcyans.