Abstract
Summary We present a method to reduce mesh bias in dynamic fracture simulations using the finite element method with adaptive insertion of extrinsic cohesive zone elements along element boundaries. The geometry of the domain discretization is important in this setting because cracks are only allowed to propagate along element facets and can potentially bias the crack paths. To reduce mesh bias, we consider unstructured polygonal finite elements in this work. The meshes are generated with centroidal Voronoi tessellations to ensure element quality. However, the possible crack directions at each node are limited, making this discretization a poor candidate for dynamic fracture simulation. To overcome this problem, and significantly improve crack patterns, we propose adaptive element splitting, whereby the number of potential crack directions is increased at each crack tip. Thus, the crack is allowed to propagate through the polygonal element. Geometric studies illustrate the benefits of polygonal element discretizations employed with element splitting over other structured and unstructured discretizations for crack propagation applications. Numerical examples are performed and demonstrate good agreement with previous experimental and numerical results in the literature. Copyright © 2014 John Wiley & Sons, Ltd.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: International Journal for Numerical Methods in Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.