Abstract
AbstractThe removal of noxious Cr(VI) from water has gained worldwide attention. In this study, biochar derived from macadamia nut shells (MHP) was embedded with iron sulfide (FeS) nanoparticles produced through a solid‐phase reduction of pyrite. The MHP‐FeS composite was evaluated for the adsorption of Cr(VI) and its subsequent reduction to Cr(III). The scanning electron microscope images revealed that the particles were of irregular shape, while the energy dispersive spectroscopy results showed the existence of Fe, S, O, and C atoms. X‐ray diffraction peaks at 2=29.8°, 33.7°, 43.7°, and 53.1° were characteristic of the formation of FeS nanoparticles. A maximum Cr(VI) adsorption capacity of 4.95 mg/g was obtained at pH 3, 60 min, and 25 °C. The higher correlation coefficient (R2>0.873) and lower residual standard error (RSE=1.43) values pointed to the adsorption process favoring Langmuir and pseudo‐second‐order models. As per thermodynamic reaction calculations, the remediation process was spontaneous and endothermic. With further optimization, this material could be a potential adsorbent and reductant for Cr(VI) in water.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
