Reducing Uncertainty in the Onset of Combustion Instabilities Using Dynamic Pressure Information and Bayesian Neural Networks

Abstract

Abstract Modern low-emission combustion systems with improved fuel-air mixing are more prone to combustion instabilities and, therefore, use advanced control methods to balance minimum NOx emissions and the presence of thermoacoustic combustion instabilities. The exact operating conditions at which the system encounters an instability are uncertain because of sources of stochasticity, such as turbulent combustion, and the influence of hidden variables, such as unmeasured wall temperatures or differences in machine geometry within manufacturing tolerances. Practical systems tend to be more elaborate than laboratory systems and tend to have less instrumentation, meaning that they suffer more from uncertainty induced by hidden variables. In many commercial systems, the only direct measurement of the combustor comes from a dynamic pressure sensor. In this study, we train a Bayesain Neural Network to predict the probability of onset of thermoacoustic instability at various times in the future, using only dynamic pressure measurements and the current operating condition. We show that on a practical system, the error in the onset time predicted by the Bayesain Neural Networks is 45% lower than the error when using the operating condition alone and more informative than the warning provided by commonly used precursor detection methods. This is demonstrated on two systems: (i) a premixed hydrogen/methane annular combustor, where the hidden variables are wall temperatures that depend on the rate of change of operating condition, and (ii) full-scale prototype combustion system, where the hidden variables arise from differences between the systems.