Reducing the Waste Oil Decomposition and Producing a useful Energy Conversion Process

Abstract

Our project is about waste oil burning system, now a days many of the fuels are available to run a vehicle or to produce power. Nowadays we are using the many source of power and the same thing it will not properly disposed and it affect the environment , we have to stop affecting the environment. So we decided to used as Waste Oil is defined as any petroleum-based oil , In world wide approximately 1.3 billion gallons of waste oil are generated from the crankcases of millions of automobiles and trucks whenever the oil is changed. Approximately 200 million gallons of waste oil are not disposed of properly. Waste oil can be disposed of in a variety of ways, including by sending it off-site (some facilities, like your local garages and waste disposal facilities, are allowed to handle the waste oil), burning it as fuel and selling the used oil claims are made that the used oil is to be burned for energy recovery, and then it is shipped to a used oil burner who burns the used oil in an approved industrial furnace or boiler. A minimum flash point of 100°F.. According to the EPA (Environmental Protection Agency) , a waste oil furnace is a type of furnace that is used for heating and is powered by old oil that is free of hazardous impurities. Boilers powered by waste oil can be utilised for a variety of commercial tasks in addition to heating. In our project we are deside to fabricate waste oil stove by reducing the use of the LPG or other electrical stove. In the burners were developed as a way to effectively burn the waste oil and to provide alternative heating systems.In this project work all the challenging parts are fabricated as per innovative design and then rigidly assembled to perform the indented function. We have to recycle the waste oil and reduce the pollution.