Abstract
CO 2 plasma was used to modify hydrophobic polypropylene microporous membranes to create hydrophilic surfaces. Structural and morphological changes on the membrane surface were characterized by X-ray photoelectron spectroscopy and scanning electron microscope. Membrane performance was tested with water flux measurements as well as protein fouling studies. The relative pure water flux of the modified membranes had a maximal value for the plasma treatment time of 2 min. It was found that the surface modified membranes showed better regeneration behavior. Flux recoveries after water and caustic cleaning were 33.1 and 27.5% higher, while reduction of pure water flux was 9.2% lower for the 30 s CO 2 plasma treated polypropylene microporous membranes than those of the virgin membranes. Moreover, the amount of protein adsorption decreased by over 50% for the treated membranes compared to the unmodified membranes. The results demonstrated that the bovine serum albumin fouling was suppressed significantly by plasma surface modification.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
