Abstract
This technical note aims to reduce friction power loss of flywheel energy storage system (FESS) supported by hydrodynamic spiral groove bearing and permanent magnetic bearing (PMB). An approach is proposed to fabricate the spiral groove bearing using polytetrafluoroethylene (PTFE) composite. A test rig is developed to test tribological properties of the spiral groove PTFE bearings. Also, two PTFE composites (C-PTFE: 80 vol.% PTFE filled with 20 vol.% graphite; C-Cu-PTFE 50 vol.% PTFE filled with 20 vol.% graphite and 30 vol.% copper powder) are tested. Results show that the friction power losses of the C-PTFE and C-Cu-PTFE bearings are lower than that of the traditional albronze (CuAl) bearing in the whole speed range. In addition, the spiral groove PTFE bearings show an excellent friction-reducing property under boundary or mixed lubrication condition. Finally, a case study is given to show the spiral groove PTFE bearing is capable of reducing the friction power loss of the FESS.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
