Abstract
A study was conducted to evaluate the feasibility of reducing or eliminating airborne lead concentrations at a covered, outdoor firing range by using totally copper-jacketed ammunition. Used in the study were 38-caliber-special police revolvers, and firings were conducted with 38-caliber, totally copper-jacketed bullets. The mean lead levels in general area air samples and personal breathing zone samples were 9.53 micrograms/m3 and 5.88 micrograms/m3, respectively, calculated as an 8-hr, time-weighted average (TWA). The mean copper levels in general area samples and personal breathing zone samples were 0.8 micrograms/m3 and 1.43 micrograms/m3, respectively. These concentrations in general area air samples and personal breathing zone samples were well below the current Occupational Safety and Health Administration (OSHA) permissible exposure limit (PEL) for occupational exposure to inorganic lead (50 micrograms/m3) and for copper (100 micrograms/m3). No significant difference was found between blood lead levels before and after firing totally copper-jacketed bullets. Based on comparison with results from a comparable study using nonjacketed lead ammunition, it was concluded that the use of totally copper-jacketed bullets significantly reduced airborne lead levels by a factor of 21 in the personal breathing zone samples and by a factor of 7.5 in the general area air samples.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
