Abstract
In this study Bacillus cereus was used to evaluate the Cr6+ reducing capacity in electroplating effluents. TheCr6+ bioreduction assays were carried out using real waste water (RWW) from an electroplating plant and artificial wastewater (AWW), with and without added glucose. The AWW was prepared using Ni ,Zn ,Cu, Pb, and Cr salts, simulating RWW concentrations. The Cr6+ concentration and bacterial growth were monitored three times a day for the duration of five days. Also, were evaluated the effects of wastewater on B. cereus B1 morphology using scanning electron microscopy. Cr6+ reduction percentage of 100 % was reached for AWW containing glucose, of 71 % for AWW without glucose, of 75.6 % for RWW with glucose, and of 31.7 % for RWW without glucose. Despite the low reduction percentage obtained for RWW without glucose, concentrations of 0.14 mg/L of Cr6+ were reached, which were within allowed limits (0.5mg/L of Cr6+). Electron Microscopy showed alterations in the bacterial cell wall and a decrease in size, mainly in the bacteria exposed to RWW. The results allow us to propose B. cereus B1 as a promising microorganism for use in the bioremediation of effluents containing Cr6+.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
