Abstract

Enzymatic saccharification of pure α-cellulose was conducted in oscillatory baffled (OBR) and stirred tank (STR) reactors over a range of mixing intensities requiring power densities (P/V) from 0 to 250Watts per cubic metre (W/m3). Both reactor designs produced similar saccharification conversion rates at zero mixing. Conversion increased with increasing mixing intensity. The maximum conversion rate occurred at an oscillatory Reynolds number (Reo) of 600 in the OBR and at an impeller speed of between 185 and 350rpm in the STR. The OBR was able to achieve a maximum conversion rate at a much lower power density (2.36W/m3) than the STR (37.2–250W/m3). The OBR demonstrated a 94–99% decrease in the required power density to achieve maximum conversion rates and showed a 12% increase in glucose production after 24h at 2.36W/m3.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.