Reduced-order modeling of pressure excitation on automotive front side window

Abstract

The pressure excitation on automotive front side window acts as an indicator of the unsteady flow and wind noise in the front side window region. The complex unsteady flow in this area generates a wider range of vortex structures resulting in the nonhomogeneous and complex pressure excitation on side glass. The description of the pressure field, which can consider the nonhomogeneous in the exact space, is needed to better solve the vibration and noise problems. The turbulent pressure excitation on side window was achieved by the incompressible improved delayed detached-eddy simulation, which is validated by the wind tunnel experiment. The reduced-order modeling methods, including the proper orthogonal decomposition and the dynamic mode decomposition, were employed to describe the pressure excitation on side glass. The dynamic mode decomposition modes separate the pressure excitation into three parts just corresponding to three main flow structures in the front side window region: the vortex shedding of the side mirror (lower frequency range), pedestal vortex (middle frequency range), and A-pillar vortex (higher frequency range). The turbulent pressure excitation generated by the vortex shedding of the side mirror contributes most of the vibration of the side glass and then the wind noise in the cabin in the low-frequency range. (The characteristic frequency is around 60 Hz, which is close to both the measured coincidence frequency and the theoretical derivation value.) The dynamic mode decomposition analysis with the unique and exact frequency for each mode, considering the nonhomogeneous of the pressure excitation, has potential to understand and solve the vibration and wind noise problems.