Abstract
In this research, cuprous oxide (pristine Cu2O) and rGO (reduced graphene oxide)-doped Cu2O were prepared using a simple synthetic route and adopted as sensitive materials for ozone detection. The microstructural, morphological and compositional properties of as-prepared samples have been analyzed by several characterization techniques including X-ray diffraction (XRD), High resolution transmission electron microscopy (HRTEM), Energy dispersive spectrometer (EDS), UV-Visible spectrophotometer (UV–vis), Multi-functional field emission scanning electron microscope (FESEM), X-ray Photoelectron Spectroscopy (XPS) and Brunauer-Emmett-Teller (BET). Meanwhile, the sensing features of as-prepared samples have been investigated carefully and the as-prepared 0.5 wt% rGO-Cu2O exhibited best ozone sensing properties, such as high stability, sensitivity and selectivity. It can be found that the response value of 0.5 wt% rGO-Cu2O-based sensor towards 20 ppb ozone and 1 ppm ozone were 9.2/1734, respectively, and the corresponding response and recovery times were 11/64 s and 11/411 s, respectively. More importantly, the detection limit of the 0.5 wt% rGO-Cu2O sensor was as low as 0.1 ppb. Furthermore, the possible mechanism for the enhanced sensing performance of the as-prepared rGO-Cu2O has been discussed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.