Abstract
Over the past few decades, microbial fuel cells (MFCs) have attracted significant interest within the realm of renewable energy technologies owing to their capability to generate electricity from low-grade substrates. However, their commercialization and scaling-up are impeded by significant obstacles, including high capital costs, limited durability, and sluggish oxygen reduction reaction (ORR). Here, we demonstrate an environmentally-friendly approach for developing highly efficient electrocatalysts consisting of palladium oxide (PdO) and different transition metal oxides (i.e., tin (IV) oxide (SnO2), ceric oxide (CeO2), iron (III) oxide (Fe2O3), and zinc oxide (ZnO)) embedded within reduced graphene oxide (rGO) framework for improving the efficiency of ORR in neutral medium and MFCs. Among the as-prepared electrocatalysts, the PdO–SnO2/rGO possesses the highest ORR electrochemical catalytic activity in a neutral medium (pH ∼ 7.2) following a four-electron ORR pathway, with a current density slightly lower than that of benchmark Pt/C electrocatalyst. The assessment of MFC performance is conducted by employing activated sludge as the inoculum and glucose as the sole electron donor in the anode chamber of single-chamber, air-cathode MFCs. Consistent with electrochemical performance, the maximum power output of an MFC equipped with PdO–SnO2/rGO as an air cathode is significantly higher than other tested MFCs, reaching 84.6 ± 2.8 mW m−2, which represents ∼ 91 % of the power output of an MFC with Pt/C air cathode. Our results reveal that the incorporation of PdO into transition metal reduced graphene oxide framework has the potential to facilitate their long-term application as air cathodes in MFCs that possess easy fabrication, relatively affordable cost, and outstanding electrochemical catalytic oxygen reduction capability, for enhancing electricity generation from wastewater.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.