Abstract
Attaining high energy density and power density in a single energy storage device is still a major challenge for electrochemical energy storage research community. Sodium-ion hybrid supercapacitor is a sustainable energy storage system which accomplishes the gap between battery and supercapacitor comprises of high energy density-battery type faradaic anode and high power density-supercapacitor type non-faradaic cathode. Here we have reported high surface area (1554m2g−1) activated porous carbon obtained from naturally occurring viscous liquid honey as a cathode and sol-gel derived, V2O5 nanorods anchored reduced graphene oxide (rGO) nanocomposite as an anode for non- aqueous sodium-ion capacitor. When explored honey derived carbon as a non-faradaic cathode, it exhibits a higher specific capacitance of 224Fg−1 and V2O5@rGO anode delivers the maximum capacitance of 289Fg−1 at 0.01Ag−1 vs Na/Na+. The prepared V2O5@rGO anode has long stable cycle life (V2O5 nanorods@rGO retains 85% of the initial capacitance (112.2Fg−1) at the current density of 0.06Ag−1 after 1000 cycles). The assembled sodium-ion capacitor (NIC) using honey derived activated carbon (AC) and V2O5@rGO anode delivers the energy density of ≈65Whkg−1 and power density of ≈72Wkg−1 at 0.03Ag−1. The capacity retention is 74% after 1000 cycles at the current density of 0.06Ag−1. The assembled sodium-ion hybrid capacitor delivers maximum energy and power density and exhibits very long stable cycle life.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.