Abstract

A nominal GeOx (x ≤ 2) compound contains mixtures of Ge, Ge suboxides, and GeO2, but the detailed composition and crystallinity could vary from material to material. In this study, we synthesize GeOx nanoparticles by chemical reduction of GeO2, and comparatively investigate the freshly prepared sample and the sample exposed to ambient conditions. Although both compounds are nominally GeOx, they exhibit different X-ray diffraction patterns. X-ray absorption fine structure (XAFS) is utilized to analyse the detailed structure of GeOx. We find that the two initial GeOx compounds have entirely different compositions: the fresh GeOx contains large amorphous Ge clusters connected by GeOx, while after air exposure; the Ge clusters are replaced by a GeO2-GeOx composite. In addition, the two GeOx products undergo different structural rearrangement under H2 annealing, producing different intermediate phases before ultimately turning into metallic Ge. In the fresh GeOx, the amorphous Ge remains stable, with the GeOx being gradually reduced to Ge, leading to a final structure of crystalline Ge grains connected by GeOx. The air-exposed GeOx on the other hand, undergoes a GeO2→GeOx→Ge transition, in which H2 induces the creation of oxygen vacancies at intermediate stage. A complete removal of oxides occurs at high temperature.

Highlights

  • A nominal GeOx (x ≤ 2) compound contains mixtures of Ge, Ge suboxides, and GeO2, but the detailed composition and crystallinity could vary from material to material

  • We find that the two initial GeOx compounds have entirely different compositions: the fresh GeOx contains large amorphous Ge clusters connected by GeOx, while after air exposure; the Ge clusters are replaced by a GeO2-GeOx composite

  • We have demonstrated that the exact composition and structure of GeOx and its structural evolution during annealing can be successfully analyzed using X-ray absorption fine structure (XAFS)

Read more

Summary

Introduction

A nominal GeOx (x ≤ 2) compound contains mixtures of Ge, Ge suboxides, and GeO2, but the detailed composition and crystallinity could vary from material to material. We synthesize GeOx nanoparticles by chemical reduction of GeO2, and comparatively investigate the freshly prepared sample and the sample exposed to ambient conditions Ge is one of the promising candidates for anode materials in Li-ion batteries[1,2] It has a theoretical capacity as high as 1600 mA h g−1 (upon formation of a Li4.4Ge alloy) and excellent Li+ diffusion rate at room temperature[1]. A nominal GeOx structure contains a mixture of Ge dioxides and sub-oxides, as well as elemental Ge. It is critical to understand the composition and the structure of GeOx to achieve better control of the crystallinity and grain size of the different constituents in terms of improving the battery performance

Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call