Abstract
A polymer–organic host–guest emitter (POHGE) system for obtaining polymer light-emitting diodes (PLEDs) with pure red emission and high luminance is proposed. The POHGE system was prepared by the fluorescent dye 4-(dicyanomethylene)-2-t-butyl-6-(1,1,7,7-tetra-methyljulolidy-9-enyl)-4H-pyran (DCJTB) doped in green-emitting polymer poly (9,9-dioctylfluorene-alt-benzothiadiazole) (BTF8). A photoluminescence (PL) quenching phenomenon was observed owing to the higher doping amount of DCJTB dopant. In this study, the red DCJTB dopant emits with high luminance and without concentration quenching when the host BTF8 emitting layer is doped with a small amount of the red guest DCJTB dopant. An optimal amount of DCCJTB dopant was obtained at 2 mg. Devices with a configuration of indium tin oxide (ITO)/poly (ethylenedioxythiophene) doped with poly (styrenesulfonate) (PEDOT:PSS)/BTF8:DCJTB/Ca/Al were fabricated. This device achieved an electroluminescence (EL) efficiency of 1.33 cd/A at 6 V. The emission area is 1.5 × 0.5 cm 2. The devices show the red light emission with a peak at about 630 nm. The color coordinate in Commission Internationale d’Eclairage (CIE) chromaticity is at x = 0.64 and y = 0.36.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
