Recycling polystyrene into fuels by means of FCC: performance of various acidic catalysts

Abstract

In accordance with the option of recycling plastics into fuels by dissolving them in standard feedstocks for the process of catalytic cracking of hydrocarbons, FCC, various acidic catalysts (zeolites ZSM-5, mordenite, Y, and a sulfur-promoted zirconia) were tested in the conversion of polystyrene dissolved into inert benzene at 550°C in a fluidized-bed batch reactor. Experiments were performed with very short contact times of up to 12 s. Main products were in the gasoline range, including benzene, toluene, ethylbenzene, styrene, and minor amounts of C 9–12 aromatics and light C 5− compounds. Coke was always produced in very significant amounts. All the products can be justified with basis on the properties of each catalyst and the various possible catalytic reaction pathways: cracking after protolytic attack on the polymer fragments, styrene oligomerization and subsequent cracking, or hydrogen transfer to styrene. Styrene would be mainly produced in this system from thermal cracking of the polymer as the initial step. If present, shape selectivity effects due to catalyst structure can influence significantly the prevalence of the various reactions, because they would interfere with those undergoing bulky transition states, like styrene oligomerization or hydrogen transfer. Even though sulfur-promoted zirconia is highly acidic, the low proportion of Brønsted-type acid sites does not allow the occurrence of secondary styrene reactions. It was shown that most favorable product distributions (higher yields of desirable products) are obtained on equilibrium commercial FCC catalysts.