Abstract
In this study, porous mullite ceramics with coral-like structures were fabricated at a low temperature of 900 °C by using photovoltaic silicon waste (PSW) as the silicon source directly. The effects of additive content and sintering temperature on the mullitization reaction of green bodies were studied. The results showed that ammonium molybdate tetrahydrate molybdenum (H24Mo7N6O24·4H2O) as an additive could reduce the reaction temperature for mullitization from 1100 °C to 900 °C. The research on the influence of catalyst on material properties showed that porous mullite ceramics with a flexural strength of 52.83 MPa, a 41.78 % porosity, a sintering expansion rate of 0.49 % and an average pore size of 0.23 μm could be fabricated by introducing 7.5 % H24Mo7N6O24·4H2O at the sintering temperature of 1000 °C. This study develops an environment-friendly recycling method of PSW and provides a new idea for the low-cost preparation of porous mullite ceramics with high purity.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
