Abstract
In the present paper, recovery of valuable metals from the poly-cracked ash obtained by pyrolysis of discarded PCBs has been studied following physical beneficiation and a hydrometallurgical process alternate to smelting. The ash is subjected to comminution for the separation of metallic components from non-metallic fractions by scrubbing, tabling and froth flotation which enriched the metal in the concentrate ~97% which was further screened to separate high and low metal concentrate. The finer fraction containing ~12% metallic value was leached in acidic solution. Almost all (Cu, Pb, Fe, etc) were leached in 4M HNO3 at 90◦C in 75 min at a pulp density 100 g/L. The characterization of both ash and residues were made by XRD, EPMA, EDS, etc. to validate the experimental results. The metals from the leach liquor could be recovered/separated using solvent extraction techniques which can further be processed to get pure metal salts/ sheets.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have