Abstract
AbstractTwo ways of recovering the properties of the scrap plastics poly(ethylene terephthalate) (PET) and high‐density polyethylene (HDPE) were analyzed: (1) blending incompletely segregated polymers with a compatibilizer and (2) blending nonsegregated polymers with a small amount (2 pph) of another compatibilizer. The advancement of the compatibilization reaction in a twin‐screw extruder depended on the residence time and intensity of mixing according to melt viscosity measurements and scanning electron microscopy observations. The acceptable mechanical properties for systems with different PET contents were obtained in blends compatibilized with ethylene–glycidyl methacrylate (EGMA) and styrene–ethylene–butylene–styrene grafted with maleic anhydride. For a blend with 75% PET and 25% HDPE, the optimum content of EGMA was determined to be about 4 pph, and a film was produced with this composition. Admixtures present in recycled HDPE migrated to PET during blending and accelerated the hydrolysis of PET. As a result of migration, differences in the mechanical properties of the blends were observed, depending on the brand of recycled HDPE used. EGMA was also successfully used for the improvement of mechanical properties of a nonsegregated mixture based on PET. Tensile properties of two compatibilized PET‐rich and HDPE‐rich commingled scraps indicated the possibility of using these blends for film extrusion, with potential applications in the packaging of technical products. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1473–1485, 2002
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
