Abstract
Increasing demands for copper and copper allied products have made the processing of low grade ores with high volume waste output unavoidable. Presently, billions of tons of copper tailings can be found in major copper producing countries. The impact of copper tailings at 0%, 5% and 10% addition level by mass of cement on the fresh and hardened properties of mortars were determined. Results showed that dry copper tailings affect mixture consistency negatively. However, the use of pre-wetted tailings reduced this drawback. Copper tailings blended mortars showed higher strength and abrasion resistance. Similarly, rate of water absorption, acid and chloride resistance higher than those of the control mixture were observed. The use of pre-wetted tailings at 5% addition level seems to be the best reuse approach.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.