Recycling of aluminum can in terms of Life Cycle Inventory (LCI)

Abstract

Life Cycle Assessment is a technique for evaluating the environmental performance of a given product by: identifying and quantifying the energy and raw materials used in its manufacturing process, as well as the emissions of pollutants to water, soil, and air inherent in this production, use and disposal, and evaluating the environmental impact associated with the use of energy and materials and the emissions of pollutants, thus identifying opportunities to improve the system in order to optimize the environmental performance of the product. CETEA (Packaging Technology Center) has conducted a Life Cycle Assessment — LCA study of aluminum can with emphasis in life cycle inventory, collecting data for the reference years 2000–2002. The goal of this paper is to present part of this complete study, focusing the influence of aluminium recycling rate on the Life Cycle Inventory (LCI) of aluminum beverage cans in Brazil. The adopted methodology was based on the recommendations of SETAC — Society of Environmental Toxicology and Chemistry and the ISO 14040 Standard, approved by the Sub-Committee 05 of the Environmental Administration Technical Committee, TC-207, from ISO — INTERNATIONAL ORGANIZATION FOR STANDARDIZATION [1,2]. Data storage and modeling were performed by employing the PIRA Environmental Management System — PEMS [3]. Taking into account the impact categories adopted in this study, it has been shown that recycling helps to improve the aluminium can environmental profile measured as LCI data. For the transformed aluminium products, the recycling rate affects the values of the environmental parameters inventoried, but not in the same proportion, since the contribution of other stages of the product system life cycle and the recycling process remain unchanged, including the yield of this process. In general, the recycling balance is always positive due to the importance of the stages that precede the packaging production and the problem of increasing the municipal waste volume. The advantages of the recycling are obviously concentrated on the inventoried parameters related to the primary aluminum production and to the package disposal. The verified benefits of the recycling increase with the recycling rate enhancement. However, the effects on the inventory do not have the same magnitude of the recycling rate. This happens due to the relative contributions of the other life cycle stages, such as the transportation and sheet or can production. In agreement with the presented results, it is possible to conclude that the aluminum can recycling reduces part of the consumption of natural resources and the emissions associated to the stages previous to the production of the packaging. The parameters specifically related to the stage of aluminum production suffer reduction directly proportional to the increase of the recycling rate. In this way, all of the efforts made to increase the recycling rate will have a positive contribution to the LCI of the aluminum can. It is worth pointing out that LCA studies are iterative and dynamic. The data can always be refined, substituted or complemented with updated information in order to improve the representativeness of the analyzed sector. From this study, the aluminum sector in Brazil is able to quantify the benefits of future actions for environmental improvement of the Brazilian aluminum industry, as well as to contribute technically to Environmental Labeling initiatives regarding aluminum products.