Abstract
The recovery of U and Pu from nitric acid using N,N-di(2-ethylhexyl)butanamide (DEHBA) in mixer-settler extractors was calculated by a simulation code, and a continuous counter-current experiment using mixer-settler extractors was performed. The flow rate, stage number, and nitric acid concentration were chosen as the parameters for the calculation, and the simulation code provided appropriate experimental conditions for separating U from Pu. The continuous counter-current experiment was carried out with three mixer-settler extractors consisted of the following 5 steps: U–Pu extraction (6 stages), Scrub (10 stages), U recovery (6 stages), Pu back-extraction (10 stages), and U back-extraction (16 stages). The results of the continuous counter-current experiment showed that the percentages of U and Pu extracted using 1.5 mol/dm3 (M) DEHBA from 4 M nitric acid were > 99.9% and 97.84%, respectively. Extracted Pu was back-extracted to the aqueous phase via contact with 0.15 M nitric acid, while most of the U content remained in the organic phase. Uranium in the organic phase was then back-extracted via contact with 0.01 M nitric acid, and the percent of U in the U fraction stream was 96.06%. The percentages of U and Pu in the Pu fraction stream were 3.94 % and 97.48%, respectively.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
