Abstract

Lithium-ion portable batteries (LiPBs) contain valuable elements such as cobalt (Co), nickel (Ni), copper (Cu), lithium (Li) and manganese (Mn), which can be recovered through solid–liquid extraction using choline chloride-based Deep Eutectic Solvents (DESs) and bi-functional ionic liquids (ILs). This study was carried out to investigate the extraction of metals from solid powder, black mass (BM), obtained from LiPBs, with various solvents used: six choline chloride-based DESs in combination with organic acids: lactic acid (1:2, DES 1), malonic acid (1:1, DES 2), succinic acid (1:1, DES 3), glutaric acid (1:1, DES 4) and citric acid (1:1, DES 5 and 2:1, DES 6). Various additives, such as didecyldimethylammonium chloride (DDACl) surfactant, hydrogen peroxide (H2O2), trichloroisocyanuric acid (TCCA), sodium dichloroisocyanurate (NaDCC), pentapotassium bis(peroxymonosulphate) bis(sulphate) (PHM), (glycine + H2O2) or (glutaric acid + H2O2) were used. The best efficiency of metal extraction was obtained with the mixture of {DES 2 + 15 g of glycine + H2O2} in two-stage extraction at pH = 3, T = 333 K, 2 h. In order to obtain better extraction efficiency towards Co, Ni, Li and Mn (100%) and for Cu (75%), the addition of glycine was used. The obtained extraction results using choline chloride-based DESs were compared with those obtained with three bi-functional ILs: didecyldimethylammonium bis(2,4,4-trimethylpentyl) phosphinate, [N10,10,1,1][Cyanex272], didecyldimethylammonium bis(2-ethylhexyl) phosphate, [N10,10,1,1][D2EHPA], and trihexyltetradecylphosphonium bis(2,4,4-trimethylpentyl) phosphinate, [P6,6,6,14][Cyanex272]/toluene. The results of the extraction of all metal ions with these bi-functional ILs were only at the level of 35–50 wt%. The content of metal ions in aqueous and stripped organic solutions was determined by ICP-OES. In this work, we propose an alternative and highly efficient concept for the extraction of valuable metals from BM of LiPBs using DESs and ILs at low temperatures instead of acid leaching at high temperatures.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call