Recovery efficiency of the hydrofluorocarbon (HFC‐134a) by activated carbons of different physicochemical properties

Abstract

The adsorption characteristics of 1,1,1,2‐tetrafluoroethane (HFC‐134a) on activated carbon were investigated to evaluate the recovery efficiency of HFC‐134a by six activated carbons (two granular activated carbons (GAC1 and GAC2), one high‐surface area activated carbon (HAC), and three activated carbon fibers (ACF10, ACF15, and ACF20)). HFC‐134a adsorption on the activated carbons increased with increase in the specific surface area and pore volume of the activated carbon. The differential heat of the HFC‐134a adsorption decreased with increase in the percentage of the micropore volume to the total pore volume. The adsorption model of HFC‐134a on the activated carbon could be based on the Langmuir model. The constant a of the Langmuir plot of HAC and ACF20 is smaller than GAC1 or GAC2 and ACF10 or ACF15, respectively. The constant Ws of HAC has the largest value. The constant a was correlated to the heat of adsorption. It is concluded that the largest amount of HFC‐134a was adsorbed on HAC, and the least amount of interaction occurred between HFC‐134a and the HAC. The amount of HFC‐134a adsorbed on the activated carbons over time was applied to the Sameshima equation. The adsorption rate constant of HFC‐134a on HAC was the largest. The HAC could be suitable for the recovery of HFC‐134a.