Abstract
A radially convergent tracer test was carried out in an unconfined Chalk aquifer of Berkshire, United Kingdom. Fluorescent tracers were injected into two boreholes lying 32 m (PL10A) and 54 m (PL10B) from the abstraction hole. The tracers were also mixed with an NaCl solution so that vertical distributions of tracer within the injection wells could be monitored using fluid electrical conductivity (FEC) logging. The breakthrough curve (BTC) from PL10A was unimodal and had a first arrival time of 14 min. The BTC from PL10B exhibited two distinct peaks and a first arrival time of just 4 min. The tracer test input functions were derived by numerically modeling the observed FEC logs of the injection wells. These were then convoluted with a conventional, Fickian matrix diffusion dual‐porosity model. The results suggested that the multiple peaks were due to the way in which the tracers left the injection wells and migrated into the aquifer. FEC log inversion proved to be an effective method for predicting borehole flow data obtained by flowmeters and recovering tracer test input functions for radially convergent tracer tests.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.