Abstract
This paper presents reconfigurable RF integrated circuits (ICs) for a compact implementation of an intelligent RF front-end for multiband and multistandard applications. Reconfigurability has been addressed at each level starting from the basic elements to the RF blocks and the overall front-end architecture. An active resistor tunable from 400 to 1600 /spl Omega/ up to 10 GHz has been designed and an equivalent model has been extracted. A fully tunable active inductor using a tunable feedback resistor has been proposed that provides inductances between 0.1-15 nH with Q>50 in the C-band. To demonstrate reconfigurability at the block level, voltage-controlled oscillators with very wide tuning ranges have been implemented in the C-band using the proposed active inductor, as well as using a switched-spiral resonator with capacitive tuning. The ICs have been implemented using 0.18-/spl mu/m Si-CMOS and 0.18-/spl mu/m SiGe-BiCMOS technologies.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IEEE Transactions on Microwave Theory and Techniques
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
