Abstract
With the extensive applications of portable, wearable, and stretchable electronics, the fiber triboelectric nanogenerator (TENG) has been developed particularly and rapidly. However, variable stiffness or even switchable stiffness for the fiber TENG is also urgently needed in some specific service conditions. Here, the functional, reconfigurable fiber TENG is presented for harvesting mechanical energy and self-powered sensors. It is mainly composed of soft tubes with filled low-melting-point alloy (LMPA), conductive wire, and electrically heated wire. Under an input frequency of 3 Hz, this fiber TENG produces a maximum peak power density of 348.5 μW/m. Due to its excellent reconfigurable characteristics, it can be switched back and forth in many different application situations. It can be intelligently used not only as a self-powered tactile and mechanical sensor but also as a self-powered splint for postdisaster relief work. Besides, the cracking detection of a gear and a lead screw is also realized using this fiber TENG. This work strongly promotes the application of variable stiffness LMPAs in the TENG, especially for the reconfigurable fiber TENG. It also promotes the potential self-powered applications of the TENG in the fields of sensors and detection, such as mechanical flaw detection and self-powered tactile detection.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.