Abstract

This paper describes the fabrication and operating principles of a reconfigurable diffraction grating based on a microfluidic device. The device consists of an array of microscopic channels (50 μm wide and 20 μm deep) defined by the conformal contact between a transparent elastomeric material that has an embossed surface relief and a flat glass substrate. The microchannels can be filled reversibly with fluids (gas, aqueous solutions, or organic solutions). The difference in index of refraction between the fluid in the array of microchannels and the structural elastomeric solid generates a difference in the phase of the light passing through the device; absorption by the fluid changes the amplitude of the light. Both of these effects give rise to diffraction. The gratings are reconfigured by pumping liquids with different indices of refraction and optical densities through the microchannels. In these experiments, the devices exhibited maximum depths of modulation of ∼20 dB and switching times of ∼50 ms; the volume of liquid sampled by the incident light was about 8 nl. The potential application of these devices as sensing elements in micro total analysis systems (μTAS) and as actuators is evaluated.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.