Reconfigurable coaxial single-photon LIDAR based on the SPAD array.

Abstract

The single-photon avalanche diode (SPAD) array with time-to-digital converter (TDC) circuits on each pixel is an excellent candidate detector for imaging LIDAR systems. However, the low fill-factor of the SPAD array does not allow for efficient use of laser energy when directly adopted in a LIDAR system. Here, we design a reconfigurable coaxial single-photon LIDAR based on the SPAD array and diffractive optical elements (DOEs). We use the DOE and beam expander to shape the laser beam into a laser dot matrix. The total divergence angle of the DOE spot beam is strictly matched to the total field of view (FOV) angle of the SPAD array. Meanwhile, each focused beamlet is individually matched to every active area of the SPAD array detector, which increases the use of output energy about 100 times compared to the diffusion illumination system. Besides, the system uses the active area as the minimum pixel and can support sub-pixel scanning, resulting in higher resolution images. Through this coaxial structure, two different telescope systems after transceiver switching can be reconfigured for imaging targets at different distances. Based on our single-photon LIDAR system, we achieved 3D imaging of targets at 100m and 180m using two different telescope configurations.