Abstract
In this paper, an analytical model has been developed to observe the recombination losses involved in a tunnel oxide passivated contact solar cell with a carrier-selective layer constituting polycrystalline silicon (poly-Si). The main focus of this paper is to observe the contribution of each component of recombination current density and its effect on open-circuit voltage, Voc. The effect of emitter saturation current density (Joe), surface recombination velocity, substrate thickness, and doping density of carrier-selective layer on Voc has been presented. The analysis indicates that Voc = 766 mV can be achieved for Joe = 2 fA/cm2, and a doping density of poly-Si > 1021cm−3 in a c-Si/SiO2/poly-Si contact for a 50- $\mu \text{m}$ -thick substrate in case of ideal surface passivation. For identical conditions, Voc attains a lower value of 750mV for a 180- $\mu \text{m}$ -thick substrate. The dependence of Voc on bandgap of tunnel layers has also been observed by considering other materials like Si3N4 and SiC. These results from the analyticalmodel have been compared with results froma simulation using automat FOR simulation of HETerostructures v2.5 and have been found to be in good agreement with each other.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
