Abstract

In this study, a normally-on AlGaN/GaN metal–insulator-semiconductor high electron mobility transistor (MIS-HEMT) and a normally-off AlGaN/GaN metal–insulator-semiconductor field-effect transistor (MIS-FET) with recessed MIS gate are fabricated by dual-channel epitaxy structure. The recessed region is cleaned by dipping it into diluted buffered oxide etch (BOE), HCl, and tetramethylammonium hydroxide (TMAH) solutions. After cleaning, a 20 nm Al2O3 is deposited by atomic layer deposition (ALD). Then, the post-deposition annealing is executed. Non-recessed MIS-HEMT demonstrates a threshold voltage of −9.81 V, a high drain current of 660.76 mA mm−1, and a small on-resistance of 6.47 Ω mm. Recessed gate MIS-FET shows a positive threshold voltage of 1.46 V with a drain current of 144.81 mA mm−1. In addition, the devices present a high gate breakdown voltage of 26.5 V by non-recessed MIS-HEMT and 18.5 V by recessed MIS-FET. Both devices show a low I–V hysteresis under double sweep I D–V GS measurement.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.