Abstract
Tungsten carbide (WC) scrap was used as a consumable anode to prepare tungsten powder in NaCl–KCl melt at 1023 K for the first time. The electrolysis process was investigated. Results showed that the tungsten component in WC anode was dissolved as W2 + into the NaCl–KCl melt. The cathode reaction was controlled by the diffusion of tungsten ions. The effect of electrolysis parameters, including the anode–cathode distance, cathode current density and different electrolysis ways (galvanostatic and potentiostatic electrolysis), on the purity and grain size of the cathode deposits was studied. It showed that a large anode–cathode distance was beneficial to the formation of pure tungsten powder at the cathode. With increasing the cathode current density, the tungsten grain size first decreased and then increased. When the cathode current density was 0.125 A cm− 2, tungsten powder with a diameter of smaller than 100 nm was obtained. Deposits prepared through galvanostatic and potentiostatic electrolysis was compared in the end.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Environmental Pollution. Series B, Chemical and Physical
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
