Real-time and sensitive detection of Salmonella Typhimurium using an automated quartz crystal microbalance (QCM) instrument with nanoparticles amplification

Abstract

The accidental contamination of Salmonella in raw and processed foods is a major problem for the food industry worldwide. At present many of the currently used methods for Salmonella detection are time and labour intensive. Therefore, rapid detection is a key to the prevention and identification of problems related to health and safety. This paper describes the application of a new quartz crystal microbalance (QCM) instrument with a microfluidic system for the rapid and real time detection of Salmonella Typhimurim. The QCMA-1 bare gold sensor chip which contain two sensing array was modified by covalently immobilising the monoclonal capture antibody on the active spot and a mouse IgG antibody on the control spot using a conventional amine coupling chemistry (EDC-NHS). The binding of the Salmonella cells onto the immobilised anti-Salmonella antibody alters the sensor frequency which was correlated to cells concentration in the buffer samples. Salmonella cells were detected using direct, sandwich, and sandwich assay with antibody conjugated gold-nanoparticles. The performance of the QCM immunosensor developed with gold-nanoparticles gave the highest sensitivity with a limit of detection (LOD) ~10–20 colony forming unit (CFU) ml−1 compared to direct and sandwich assay (1.83×102CFUml−1 and 1.01×102CFUml−1, respectively). The sensor showed good sensitivity and selectivity for Salmonella in the presence of other bacteria in real food samples and helped in reducing the pre-enrichment step, hence, demonstrating the potential of this technology for the rapid and sensitive microbial analysis.