Abstract
1.54-μm erbium ions (Er3+ ) electric pumped light sources with excellent optical property and simple fabrication process are urgently desired to satisfy the development of silicon-based integration photonics. The previous Er-based electroluminescence (EL) devices are mainly based on Er-complexes or Er-doped oxide compounds, which usually suffer from low external quantum efficiency(EQE)or high applied voltage etc. In this work, a novel type of Er3+ /Yb3+ co-doped lead-halide perovskite films (Er3+ /Yb3+ :CsPbCl3 ) with the maximum photoluminescence quantum yield (PLQY) of 30.12% are prepared by a simple two-step solution-coating method and the corresponding light emitting diodes (Er-PeLEDs) are fabricated, which demonstrate a almost pure 1.54-μm emission and a peak EQE up to 0.366% at a low applied voltage of 1.4V. Strong negative thermal quenching effect may help Er-PeLEDs suppress Joule heating quenching. These excellent LED properties benefit mainly from outstanding regulatory performance of acetate to perovskite films, the excellent semiconductor behavior and strong ionic property of the perovskite, and the involving of Yb3+ ions, which can directly and efficiently transfer the exciton energy to Er3+ through a quantum cutting process. Overall, the realization of 1.54-μm Er-PeLEDs offers new opportunities for silicon-based integrated light sources. This article is protected by copyright. All rights reserved.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have