Abstract
As the recording density increased in hard disk drives (HDDs), the head disk interface (HDI) spacing has been decreased to 2-3 nm during its operation. The head slider may pick up the lubricant at this contact or near-contact HDI. Therefore, a real-time visualization of lubricant thickness distribution on a slider surface is essential to study the physical mechanisms for reducing the head disk interface spacing. A vertical-objective-based ellipsometric microscope (VEM) was presented as the effective method for real-time visualization of nm- thick lubricant films on disks with high lateral resolution. However, extinction coefficient of head slider is low, which means the intensity of reflected light may be reduced. In this report, the feasibility of VEM used for head observation is discussed, and the images of polar perfluoropolyether (PFPE) lubricant Zdol4000 applied on head slider are obtained by the current setup. It indicates that this method can be used in real-time visualization of nm-thick lubricant films on head slider.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IOP Conference Series: Materials Science and Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
