Real-time optimization using gradient adaptive selection and classification from infrared sensors measurement for esterification oleic acid with glycerol

Abstract

PurposeThe production of glycerol derivatives by the esterification process is subject to many constraints related to the yield of the production target and the lack of process efficiency. An accurate monitoring and controlling of the process can improve production yield and efficiency. The purpose of this paper is to propose a real-time optimization (RTO) using gradient adaptive selection and classification from infrared sensor measurement to cover various disturbances and uncertainties in the reactor.Design/methodology/approachThe integration of the esterification process optimization using self-optimization (SO) was developed with classification process was combined with necessary condition optimum (NCO) as gradient adaptive selection, supported with laboratory scaled medium wavelength infrared (mid-IR) sensors, and measured the proposed optimization system indicator in the batch process. Business Process Modeling and Notation (BPMN 2.0) was built to describe the tasks of SO workflow in collaboration with NCO as an abstraction for the conceptual phase. Next, Stateflow modeling was deployed to simulate the three states of gradient-based adaptive control combined with support vector machine (SVM) classification and Arduino microcontroller for implementation.FindingsThis new method shows that the real-time optimization responsiveness of control increased product yield up to 13 percent, lower error measurement with percentage error 1.11 percent, reduced the process duration up to 22 minutes, with an effective range of stirrer rotation set between 300 and 400 rpm and final temperature between 200 and 210°C which was more efficient, as it consumed less energy.Research limitations/implicationsIn this research the authors just have an experiment for the esterification process using glycerol, but as a development concept of RTO, it would be possible to apply for another chemical reaction or system.Practical implicationsThis research introduces new development of an RTO approach to optimal control and as such marks the starting point for more research of its properties. As the methodology is generic, it can be applied to different optimization problems for a batch system in chemical industries.Originality/valueThe paper presented is original as it presents the first application of adaptive selection based on the gradient value of mid-IR sensor data, applied to the real-time determining control state by classification with the SVM algorithm for esterification process control to increase the efficiency.