Real-Time Nonlinear Control Allocation Framework for Vehicles with Highly Nonlinear Effectors Subject to Saturation

Abstract

Hybrid Unmanned Aerial Vehicles UAV are vehicles capable of take-off and landing vertically like helicopters while maintaining the long-range efficiency of fixed-wing aircraft. Unfortunately, due to their wing area, these vehicles are sensitive to wind gusts when hovering. One way to increase the hovering wind-rejection capabilities of hybrid UAV is through the addition of extra actuators capable of directing the thrust of the rotors. Nevertheless, the ability to control UAVs with many actuators is strictly related to how well the Control Allocation problem is solved. Generally, to reduce the problem complexity, conventional (CA) methods make use of linearized control effectiveness in order to optimize the inputs that achieve a certain control objective. We show that this simplification can lead to oscillations if it is applied to thrust vectoring vehicles, with pronounced non-linear actuator effectiveness. When large control objectives are requested or actuators saturate, the linearized effectiveness based CA methods tend to compute a solution far away from the initial actuator state, invalidating the linearization. A potential solution could be to impose limits on the solution domain of the linearized CA algorithm. However, this solution only reduces the oscillations at the expense of a lag in the vehicle acceleration response. To overcome this limitation, we present a fully nonlinear CA method, which uses an Sequential Quadratic Programming (SQP) algorithm to solve the CA problem. The method is tested and implemented on a single board computer that computes the actuator solution in real time onboard a dual axis tilting rotor quad-plane. Flight test experiments confirm the problem of severe oscillations in the linearized effectiveness CA algorithms and show how the only algorithm able to optimally solve the CA problem is the presented Nonlinear method.