Real-time electrical impedance monitoring of carbon fiber-reinforced polymer laminates undergoing quasi-static indentation

Abstract

Laminated composites are vulnerable to damage from out-of-plane loading, particularly impact loading, and the incurred damage is often only detected by evaluating the post-impact condition of the composites. Real-time monitoring techniques are desirable for early detection of damage. Utilizing changes in the electrical properties of composites to track incurred damage is promising, but the interpretation of such measurements is still challenging. Here, an electro-mechanical system is introduced to understand how well we could detect mechanical degradation in carbon-fiber-reinforced polymer (CFRP) plates undergoing a quasi-static indentation (QSI) test, which is representative of an impact load. The system measures the in situ, real-time changes in impedance and phase angle along the specified conductivity paths. Two different electrode configurations are proposed and tested. In all studied cases, the system effectively detected severe damage, characterized by an immediate reduction in strength, in CFRP. Using our proposed electrode configurations, we discovered that the early detection of barely visible damage strongly depends on two factors: (i) the location of the injection-measurement points with respect to the damage, and (ii) the orientation of the measurement paths with respect to the fibers orientation in the laminated CFRP surface.