Real-time detection method of gear contact fatigue pitting based on machine vision.

Abstract

This paper proposes a real-time detection method for gear contact fatigue pitting based on machine vision in order to improve the detection accuracy and detection efficiency of specimen fatigue pitting in gear contact fatigue tests and to realize the visualization, quantification, and real-time detection of gear pitting. Under the principle of gear meshing and the shooting principle of a line-scan camera, a test detection system for gear contact fatigue is established, and the optimal centrifugal shooting distance for the gear tooth surface is obtained by analyzing the gear rotation process. In response to the phenomenon of image overlap caused by the inconsistency between the speed of each point on the gear tooth profile and the line frequency set by the camera, an image correction algorithm of the gear meshing surface has been proposed, which has been proven to have improved the accuracy of the detection results of gear contact fatigue pitting corrosion. The detection accuracy of fatigue pitting corrosion is improved by combining the preliminary detection and the accurate detection of the fatigue features. The depth information of the extracted contour pitting pits is extracted by the sequential forward selection (SFS) algorithm. The experimental results showed that 0.1216mm2 is the average absolute error of pitting corrosion detection, the average relative error is 2.2188%, and the detection accuracy is 97.7812%. The proposed pitting corrosion detection system advances in visualization, quantification, real-time monitoring, and failure judgment with a new, to the best of our knowledge, experimental approach for gear contact fatigue pitting corrosion detection.